GPR Steering Damper and Woodcraft Clip-ons compatibility

[djfz07]

Long story short, the two are NOT compatible.  I just installed a GPR steering stabilizer and one of the questions that I've had before purchase was whether or not it would be compatible with the Woodcraft clip-on setup.  I couldn't find a straight answer anywhere when I searched so I figured I'd post up my findings for anybody else who might be wondering the same.

 

The GPR dampener setup replaces the stock handlebar mount completely and allows the use of the stock 7/8th bars or 1 1/8th fat bars.  Just uses spacers to fill the gap with the smaller diameter bars.  The Woodcraft clip-on setup https://www.revzilla.com/motorcycle/woodcraft-clip-on-risers-w-adapter-plate-yamaha-fz-07-2015-2016 uses the stock bar mount and basically replaces the upper clamps.  The GPR mount is both wider in width and wider at the clamp bolts.  The pics show the differences holding the stock mount and clamps next to the GPR mount.  Sorry if they're a little hard to see.

 

I hope this helps bring some more info to the forums!

[phanomenal07]

Thanks for posting this. I was wondering the same thing for the longest time.