Jump to content
The MT-07 Forum

Motordynamics Integrated Tail Light and Flush Mount LEDs


novascotianfz

Recommended Posts

novascotianfz

Hey all,
  Hoping someone here can help me out. 
 
I've installed both of the subject items and feel the flush mount LEDs might be flashing too fast still. The MD tail light specifies that resistors must be used with front LEDs and that a flasher relay cannot be used with them. Is this due to the MD tail light having resistor built into the wiring harness? Any idea if this resistor can be eliminated and have the MD tail light still work?
 
Thanks!
 
NovaScotianFZ

Link to comment
Share on other sites

MD sells an additional harness without resister that can be used with an aftermarket relay. Mine works fine that way. I presume you could also cut and crimp and solder something yourself but the accessory is Plug N Play for like $10.
 
Here's their bypass harness with relay package:
 
Motodynamic
 
They have installation instructions on the website.

Link to comment
Share on other sites

novascotianfz

Thanks all for the replys. As I already have a flasher relay I've ordered the bypass harness from MD.
 
NovaScotianFZ

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.