Gilles Tooling ACM Titanium Axle Nut GROUP BUY!!! (ENDED)

[bellissimoto 340]

Hello everyone!!!
 
Due to popular demand, we are having a group buy on the Gilles Tooling ACM Titanium Axle Nut!
 
As some of you know, the stock rear axle nut has been prone to causing problems...the two large metal flanges that act as the locking mechanism sometimes jam up on the threads of the axle and almost weld themselves to it.  When using force to break it loose, either the threads strip, or the axle block that holds the axle in place breaks.
 
The issue is with those large metal flanges on the stock nut. The solution is to use a different nut - The Gilles Tooling ACM Titanium Axle Nut.
 
Info:
 
One of the lightest axle nuts on the market, the ACM Titanium Axle Nut by Gilles Tooling is one of the safest too. The patent pending pin-lock safety technology secures the ACM Titanium Axle Nut in place, making it bomb-proof while allowing it to be loosened faster than a split pin secured nut. It weighs just 20 grams, which is less than 3/4ths of an ounce, and is a perfect fit when using stock hardware or the Gilles Tooling AXB Chain Adjusters.
 
 
 
It's design is inspired and derived by factory racing teams, and has been used by professional racers such as Cal Crutchlow to become a World SuperSport Champion.
 
 
 
A product of award-winning precision engineering makes the ACM Titanium Axle Nut TUV and ISO certified, and will no doubt give your bike that ultra-premium look.
 
 
 
M18x1.5
 
Material: Titanium ti6alv4
 
Ultra lightweight at 20 grams (less than 3/4ths of an ounce)
 
Innovative pin-interlock security w/ high locking characteristics
 
Perfectly compliments chain adjuster kits by Gilles Tooling
 
Plastic-pin accomodates thread form and locks with friction
 
Simple security through interlock system
 
Easy assembly with a Included hex tool
 


 
You can see the locking mechanism here...a plastic threaded insert comes out and locks against the threads when you tighten the set screw on the face of the nut.  Pretty ingenious.  I've had mine on and off over 20 times now without issue. 
 
 
 
Since I've just sold the last one this morning and had many inquires since, I plan to bring a bunch in and offer a group buy on this item.  Because the shipping cost is getting absorbed into a much bigger order, I'm able to pass the savings on to everyone and offer it at a fantastic price.
 
 
Retail is $87 shipped...GROUP BUY PRICE:  $65 shipped (within the US, add $15 for international)
 
I'd like 5 people to make this happen.  Should have stock in about 3 weeks.
 
 
Reserved List:
 
1.  @slow06er   PAID
2.  @rowdy   PAID
3.  @lovakhan   PAID
4.  @ddog  PAID
5.  @easternkayaker  PAID
6.  @cybmx   PAID
7.  @sorkyah  PAID
8.  @crazycracka501  PAID
9.  @2wheeler  PAID
10. @i2837856393  PAID
11.  @reboot PAID
12.  @cleansimple  PAID
13  @howlinhoss  PAID
14.  @kameronk  PAID
15.  @tastygarage    PAID
 
 
Wow, that went quick!  But it's not over!!!  I'm going to place an amendment order for more of these so I'll honor the group buy price for those who follow (until the supply on this amendment order runs out, which will be 10 more).
 
 
 

 
- Paul
 
www.bellissimoto.com
 
 
 
 
 
 
 
 
 
 

[lovakhan 86]

Add me pls. Wondering tho if this will still function w my mud guard

[bellissimoto 340]

@lovakhan, the Gilles Tooling ACM Titanium Axle Nut is a direct replacement for the stock one, so if your stock one works, this should too
 
- Paul
 
www.bellissimoto.com

[lovakhan 86]

Alright. Sounds. Im in!

[etorty 34]

Guys, I have it, and I'm really happy with it.
The OE nut was stuck, and after a complete change of the rear axle and plates I bought the GT's ACM Titanium nut.
It's a real jewel, and I recommend all the Gilles Tooling's toys.
Really good products.
One important advice: use anti-seize compound between the TI nut and the plates/axle.
The titanium can seize up if it's in contact with another metal.

 

 

[Guest ChicagoAJ]

Add me pls. Wondering tho if this will still function w my mud guard  

With the minuscule amount of thread your axle nut grabs onto, I don't think I'd ever worry about it getting stuck to the point of not being able to get it off. You could put a small pick in there to unlock it! 
I still want this axle nut, but the price is off-putting unless it lasts forever!

[rowdy 823]

The Gilles axle nut works with a standard socket right? 27mm?

[rowdy 823]

@chicagoaj It might not last forever, but it's TITANIUM! It will last a long time, never corrode, and matches my Akra Ti exhaust!

[Guest ChicagoAJ]

@chicagoaj It might not last forever, but it's TITANIUM! It will last a long time, never corrode, and matches my Akra Ti exhaust!

It'll last as long as the plastic thread lock tab lasts or the set screw. I have no doubt it's a good product though. 

[rowdy 823]

@chicagoaj It might not last forever, but it's TITANIUM! It will last a long time, never corrode, and matches my Akra Ti exhaust!

It'll last as long as the plastic thread lock tab lasts or the set screw. I have no doubt it's a good product though. 

Good point.  They should offer a rebuild kit. I ordered one anyway.  I can't resist that kind of swag, especially when the stock nut is so prone to major problems.
 

[ddog 260]

I'm in!

[norcal616 885]

Sent mail for 2 of them ...one for the wild child fz-07 and one for the fying fortress fj-09...I actually have the nut on the shifter side of the bike to keep the heat from the exhaust off the stock nut...
 
Btw : fz-07+fj-09=harmony...they go together like ying and yang...

[rowdy 823]

Sent mail for 2 of them ...one for the wild child fz-07 and one for the fying fortress fj-09...I actually have the nut on the shifter side of the bike to keep the heat from the exhaust off the stock nut... 
Btw : fz-07+fj-09=harmony...they go together like ying and yang...

I'm so jealous!   

[Eastern Kayaker 207]

Hey Paul, count me in for this group buy.

[etorty 34]

The Gilles axle nut works with a standard socket right? 27mm?

Right: 27 mm.

[cybmx 65]

In for one

[sorkyah 1,497]

Damn....
Get me in on this

[crazycracka501 274]

Wow, that went quick!  But it's not over!!!  I'm going to place an amendment order for more of these so I'll honor the group buy price for those who follow (until the supply on this amendment order runs out, which will be 10 more).
 
 
 

 
- Paul
 
www.bellissimoto.com
 
 
 
 
 
 
 
 
 

I'm in for sure!!  Please add me to the list.

[Guest 2wheeler]

Better safe then sorry... count me in too
 

[i28 503]

You temptress with your titanium trinkets!
I'm in!

[bellissimoto 340]

Hi everyone!
 
Just wanted to let everyone know we're still waiting on the Gilles Ti Axle nuts. Apparently, we cleaned them out and they had to manufacture more! I can only deduce that it's taking so long because they are making quite a few more than just what we ordered, so I'll keep everyone posted as I get updates.
 
Just wanted to let everyone know I didn't forget about this...
 
I'm personally waiting for one as well, for something else
 
- Paul
 
www.bellissimoto.com

[sorkyah 1,497]

Hi everyone! 
Just wanted to let everyone know we're still waiting on the Gilles Ti Axle nuts. Apparently, we cleaned them out and they had to manufacture more! I can only deduce that it's taking so long because they are making quite a few more than just what we ordered, so I'll keep everyone posted as I get updates.
 
Just wanted to let everyone know I didn't forget about this...
 
I'm personally waiting for one as well, for something else
 
- Paul
 
www.bellissimoto.com
 

is there a possibility they have one available for the countershaft too?
it would only be awesome to have both... Gilles everything 

[bellissimoto 340]

Hi everyone! 
Just wanted to let everyone know we're still waiting on the Gilles Ti Axle nuts. Apparently, we cleaned them out and they had to manufacture more! I can only deduce that it's taking so long because they are making quite a few more than just what we ordered, so I'll keep everyone posted as I get updates.
 
Just wanted to let everyone know I didn't forget about this...
 
I'm personally waiting for one as well, for something else
 
- Paul
 
www.bellissimoto.com
 

is there a possibility they have one available for the countershaft too? it would only be awesome to have both... Gilles everything 

To my knowledge, they don't offer it... 

 
- Paul
 
www.bellissimoto.com

[reboot 25]

Still room to get on the group buy?? If so I will take one!

[cleansimple 0]

If they are still available, I would like one as well.
 
Able to pay immediately as well. Thanks!