zombiphone Posted January 5, 2016 Share Posted January 5, 2016 So, I know the stock bars on the FZ are supposedly internally threaded, which limits the options for handguards by a lot, but has anyone found a good way to make universal handguards work in the bar ends? If so, is it complicated to make it work? I've been avoiding pulling the trigger on the SW motech kobras just because they're pricey for what they are and only have a single mounting point for the backbone. I want the protection of a full aluminum backbone like I have on my mini (which has some moose racing backbones), so I don't really want to go with the powermadd guards either, since they offer even less protection. Anyone have some better options than these two that'll work? Published 'Chronicles of a Motorcycle Gypsy' a book about my travels on the FZ, and a writer for Motorcyclist Magazine Link to comment Share on other sites More sharing options...
motocr Posted January 5, 2016 Share Posted January 5, 2016 So, I know the stock bars on the FZ are supposedly internally threaded, which limits the options for handguards by a lot, but has anyone found a good way to make universal handguards work in the bar ends? If so, is it complicated to make it work? I've been avoiding pulling the trigger on the SW motech kobras just because they're pricey for what they are and only have a single mounting point for the backbone. I want the protection of a full aluminum backbone like I have on my mini (which has some moose racing backbones), so I don't really want to go with the powermadd guards either, since they offer even less protection. Anyone have some better options than these two that'll work? I ordered these http://www.amazon.com/gp/aw/d/B00EQ9MZAE/ref=mp_s_a_1_1?qid=1452025357&sr=8-1&pi=AC_SX118_SY170_QL70&keywords=Bark+busters+storms they have expanders that expand a tube of metal which grips your threads and how them in there they did not mess up any of my threads after I tried them.on once so if those have a similar mounting hardware it will work. Link to comment Share on other sites More sharing options...
nexus Posted January 6, 2016 Share Posted January 6, 2016 I just drilled and tapped the factory bar end weights and bought new bolts on my bike to fit my zeta xc2 handguards Link to comment Share on other sites More sharing options...
caliesv Posted January 23, 2016 Share Posted January 23, 2016 So, I know the stock bars on the FZ are supposedly internally threaded, which limits the options for handguards by a lot, but has anyone found a good way to make universal handguards work in the bar ends? If so, is it complicated to make it work? I've been avoiding pulling the trigger on the SW motech kobras just because they're pricey for what they are and only have a single mounting point for the backbone. I want the protection of a full aluminum backbone like I have on my mini (which has some moose racing backbones), so I don't really want to go with the powermadd guards either, since they offer even less protection. Anyone have some better options than these two that'll work? I ordered these http://www.amazon.com/gp/aw/d/B00EQ9MZAE/ref=mp_s_a_1_1?qid=1452025357&sr=8-1&pi=AC_SX118_SY170_QL70&keywords=Bark+busters+storms they have expanders that expand a tube of metal which grips your threads and how them in there they did not mess up any of my threads after I tried them.on once so if those have a similar mounting hardware it will work. Any pics of them installed? ☺ Link to comment Share on other sites More sharing options...
Premium Member slow06er Posted January 23, 2016 Premium Member Share Posted January 23, 2016 Here a few pictures of my BarkBuster "Storm" setup, it works well against the wind and the rain too. I hope these pictures help. Link to comment Share on other sites More sharing options...
caliesv Posted January 23, 2016 Share Posted January 23, 2016 Man... Nice! OK, not to be all pushy, but can you take a pic from further away of the front? Lol if not it's all good. Are the mounting hardware separate? I like the "on bar" type mounts. Maybe a link? Link to comment Share on other sites More sharing options...
Premium Member slow06er Posted January 23, 2016 Premium Member Share Posted January 23, 2016 Sorry, I had no space in the garage, but for a fellow FZ07 rider , we will go to the extreme and get him the pictures, I hope these outside pictures help you Link to comment Share on other sites More sharing options...
caliesv Posted January 23, 2016 Share Posted January 23, 2016 Nice. Thanks man. An organized garage means a well taken care of bike in my book. Did the guards come with the bar clamp mount or was that separate? Link to comment Share on other sites More sharing options...
Premium Member slow06er Posted January 24, 2016 Premium Member Share Posted January 24, 2016 Nice. Thanks man. An organized garage means a well taken care of bike in my book. Did the guards come with the bar clamp mount or was that separate? Mine came with the clams to be mounted on the inside of the bar (as you could see from the pictures), I know they also make one for the outside mounting, a good place to check is revzilla, they have different kind of guards. As for my garage....!!!, you are correct, it needs some cleaning up. Link to comment Share on other sites More sharing options...
caliesv Posted January 24, 2016 Share Posted January 24, 2016 Nice. Thanks man. An organized garage means a well taken care of bike in my book. Did the guards come with the bar clamp mount or was that separate? Mine came with the clams to be mounted on the inside of the bar (as you could see from the pictures), I know they also make one for the outside mounting, a good place to check is revzilla, they have different kind of guards. As for my garage....!!!, you are correct, it needs some cleaning up. Lol thanks I was saying your garage looks organized btw. Link to comment Share on other sites More sharing options...
dmf Posted January 24, 2016 Share Posted January 24, 2016 I put these on with no issues: Powermadd Star Hand Guards with Mirrors - Review/Installhttp://fz07.org/thread/4213 Link to comment Share on other sites More sharing options...
recurveshooter Posted January 27, 2016 Share Posted January 27, 2016 @slow06er - How are those hand guards when you're doing 70? Just being supported from one end I'm wondering if they flap around any. Thanks - recurveshooter Link to comment Share on other sites More sharing options...
zombiphone Posted January 27, 2016 Author Share Posted January 27, 2016 I looove the look of the powermadds, but I really wish they had more of a backbone. Same with the Storms. The big motivator for me is about 50% wind protection and about 50% crash protection. The more I look at this stuff, It looks like barkbuster and swmotech's fz-09 kits use both mounting points though. if you guys can fit both a clam style and a bar end style on there individually, I wonder if I could fit both at once with a full backbone. Published 'Chronicles of a Motorcycle Gypsy' a book about my travels on the FZ, and a writer for Motorcyclist Magazine Link to comment Share on other sites More sharing options...
zombiphone Posted January 27, 2016 Author Share Posted January 27, 2016 I just drilled and tapped the factory bar end weights and bought new bolts on my bike to fit my zeta xc2 handguards Are these basically what you got? http://www.amazon.com/Zeta-Aluminum-Handguards-Handlebars-Black/dp/B001LV4KCG/ref=pd_sim_263_5?ie=UTF8&dpID=31i7e4c80yL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1QHY0BXYGH0E819R11ZX No clearance issues with the levers or anything? That doesn't sound too bad to fit Not sure why I never got notifications that this thread had replies until now ^^;; Published 'Chronicles of a Motorcycle Gypsy' a book about my travels on the FZ, and a writer for Motorcyclist Magazine Link to comment Share on other sites More sharing options...
caliesv Posted January 28, 2016 Share Posted January 28, 2016 I just drilled and tapped the factory bar end weights and bought new bolts on my bike to fit my zeta xc2 handguards Are these basically what you got? http://www.amazon.com/Zeta-Aluminum-Handguards-Handlebars-Black/dp/B001LV4KCG/ref=pd_sim_263_5?ie=UTF8&dpID=31i7e4c80yL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1QHY0BXYGH0E819R11ZX No clearance issues with the levers or anything? That doesn't sound too bad to fit Not sure why I never got notifications that this thread had replies until now ^^;; Anyone wanna be the guinea pig? Lol I'd love to have these on my bike Link to comment Share on other sites More sharing options...
tvp Posted January 28, 2016 Share Posted January 28, 2016 I like the Zeta's. I appears this guy was the guinea pig. https://www.google.com/url?q=http://fz07.org/thread/127/yamaha-fz-07-today%3Fpage%3D8&sa=U&ved=0ahUKEwi6msikss3KAhWB7R4KHTMwC30QFggEMAA&client=internal-uds-cse&usg=AFQjCNGLbuhPvbf2x6NuDqhzlfYmNAzGpg Link to comment Share on other sites More sharing options...
zombiphone Posted January 28, 2016 Author Share Posted January 28, 2016 Oh hey! I didn't know you were on here, Lea! HI! Those zetas are actually pretty ridiculously sexy installed. I think I'm gonna go order a set right now and make it work, because the price is right and it's the only set I'm seeing with both a bar end and handlebar clamp mount (Opposed to just one or the other) Published 'Chronicles of a Motorcycle Gypsy' a book about my travels on the FZ, and a writer for Motorcyclist Magazine Link to comment Share on other sites More sharing options...
caliesv Posted January 28, 2016 Share Posted January 28, 2016 Oh hey! I didn't know you were on here, Lea! HI! Those zetas are actually pretty ridiculously sexy installed. I think I'm gonna go order a set right now and make it work, because the price is right and it's the only set I'm seeing with both a bar end and handlebar clamp mount (Opposed to just one or the other) Pictures! Can't wait. ☺ Link to comment Share on other sites More sharing options...
tvp Posted January 28, 2016 Share Posted January 28, 2016 Hi Tiff! I am only here once a month or so. Greenhound [HASH]386 is also on here. If you get those sexy Zeta's installed, post up a pic! I may have to copy you. Link to comment Share on other sites More sharing options...
dmf Posted January 28, 2016 Share Posted January 28, 2016 I looove the look of the powermadds, but I really wish they had more of a backbone. Same with the Storms. The big motivator for me is about 50% wind protection and about 50% crash protection. The more I look at this stuff, It looks like barkbuster and swmotech's fz-09 kits use both mounting points though. if you guys can fit both a clam style and a bar end style on there individually, I wonder if I could fit both at once with a full backbone. You can add on a sidebar mount from powermadd to give better protection like other handguards. Link to comment Share on other sites More sharing options...
kanchanj88 Posted February 1, 2016 Share Posted February 1, 2016 Anyone tried these?? Acerbis 2142000001 Rally Pro X-Strong -http://www.amazon.com/gp/aw/d/B000GVC9YI?th=1&psc=1 They fit on any 7/8" bars and seem like they are of good quality. I'm new here, haven't got my bike yet. But looking around for accessories, lol. Thanks guys!! Link to comment Share on other sites More sharing options...
tvp Posted February 2, 2016 Share Posted February 2, 2016 Anyone tried these?? Acerbis 2142000001 Rally Pro X-Strong -http://www.amazon.com/gp/aw/d/B000GVC9YI?th=1&psc=1 They fit on any 7/8" bars and seem like they are of good quality. I'm new here, haven't got my bike yet. But looking around for accessories, lol. Thanks guys!! I like those too. I owned some and they busted much bark and held up well. They probably saved me the price of a few sets of levers. I thought an extension mounting bracket was needed to make these dirt bike hand guards work with FZ-07 street switch gear. Zeta offers one that works with their product.Does Acerbis offer one? Link to comment Share on other sites More sharing options...
Premium Member slow06er Posted February 2, 2016 Premium Member Share Posted February 2, 2016 @slow06er - How are those hand guards when you're doing 70? Just being supported from one end I'm wondering if they flap around any. Thanks - recurveshooter They do just fine at 70 mph or even a little bet higher " I don't often go past 85 mph " Link to comment Share on other sites More sharing options...
Premium Member tino206 Posted February 2, 2016 Premium Member Share Posted February 2, 2016 I found a link to a set of Storm handguards that mount only at one end, this is great because i like my bar end mirrors Link to comment Share on other sites More sharing options...
Premium Member tino206 Posted February 2, 2016 Premium Member Share Posted February 2, 2016 http://www.twistedthrottle.com/barkbusters-storm-s2-handguards-with-universal-single-sided-mount-for-1-handlebars?gclid=CKPmkLGR2soCFZRcfgod0XoC1w Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.