Replacement LED turn signal indicators?

[wallsandfoundations]

Greetings! I just bought a brand new 2015 FZ-07 and so far I love it! Looking to do a few small mods to start with and go from there..
 
To start off I'm getting an H4 HID kit from diodedynamics.com and a Yoshimura fender eliminator kit from revzilla.com. I also wanted to get some new LED turn signal indicators but I can't find any I like. I would like them as low profile as possible and good quality - pricing isn't an issue. Any leads?
 
Also, excited to be a part of the forums!

[sorkyah]

You could try flush mounts if you want them as low pro as possible
 
http://www.motodynamic.com/flush-mount-led-front-turn-signals-2006-2007-yamaha-yzf-r6.html
 
 
These are what i ordered for my fronts, but i could see em working for the rear too. Any 2006 r6 flush mounts should fit the stock hole without modding it

[Guest cjwwd2]

These are what I have on my bike, that's even them on my bike at the bottom of the page http://www.pjsparts.com/catalog/product_info.php?cPath=59&products_id=5465

[so1102]

These are what I have on my bike, that's even them on my bike at the bottom of the page http://www.pjsparts.com/catalog/product_info.php?cPath=59&products_id=5465

Those are sweet!

[so1102]

I went with these (in carbon) -- not terribly small, but I think they look good on the bike -- and they work well: http://www.revzilla.com/motorcycle/bikemaster-spade-led-turn-signals

[ja88af]

This is what I have on mine, very wallet friendly.
 
http://tinypic.com/r/n66oig/8

[Beemer]

Mine aren't the smallest but the cool thing about them was they look good, come with a fender eliminator kit and are cheap even as a combo for $69.99.
 
 
[attachment id=883" thumbnail="1]
 
 
http://www.ebay.com/itm/331315363435?item=331315363435&viewitem=&vxp=mtr
 
But, you will need these to make them look right. $14.99 (ok, now not so cheap)
 
 
http://www.ebay.com/itm/331462850335?item=331462850335&viewitem=&vxp=mtr

[garrim]

I just replaced the tail light on mine, has integrated turn signals:
 


 
From a Canadian eBay seller, Moto X Tuner (if you look up my threads I posted a link directly).
 
For the fronts I got these:
 


 
Again, links in my thread showing the install. Everything from eBay, easy peasy.
 
 

[phyciocc]

The Fz-07 has daytime running light upfront. If you want to keep that capability AND have LED , you need signals with three wires (or have to do a lot more gyrations with install). I found THESE three-wires one on Ebay. They are not fancy designs, but they work.
 
I am a crazy Physics Prof. Beware

[pantheraleo]

The Fz-07 has daytime running light upfront. If you want to keep that capability AND have LED , you need signals with three wires (or have to do a lot more gyrations with install). I found THESE three-wires one on Ebay. They are not fancy designs, but they work. 
I am a crazy Physics Prof. Beware

I just bought those a couple of days ago. They match the ones that came with my tail tidy.

[sorkyah]

http://fz07.org/thread/3687/
 
this thread has some info as well
one of the latest posts mentions a motodynamics option specifically for the fz

[marc]

i just fitted some new LED indicators to the back. but the hazards are not working anymore? left/right works like it should.
anyone know what i possibly did wrong?

[mjh937]

That is weird. It seems unlikely, but are the hazards on a separate fuse?

[marc]

i have no idea, all i did was take the stock ones off and put the new indicators on - soldered onto the stock connectors.

[mjh937]

I would double check all the fuses just in case. The other problem could be the switch. I always check my turn signals but have not checked my hazard lights for ages. Perhaps the switch failed a while back and it has nothing to do with the new lights. Another thing that just sprang to mind, you said you changed the rear signals. If the front are still incandescent bulbs perhaps the amperage difference with both the front ones powered at the same time is the problem.

[marc]

oh, that could be. i left the stock ones in the front for now.

[AlbatrossCafe]

These are what I have on my bike, that's even them on my bike at the bottom of the page http://www.pjsparts.com/catalog/product_info.php?cPath=59&products_id=5465

Are these the ones that are lit up on the back of the signal as well? (both sides are lit?) 

[zero]

You could try flush mounts if you want them as low pro as possible 
http://www.motodynamic.com/flush-mount-led-front-turn-signals-2006-2007-yamaha-yzf-r6.html
 
 
These are what i ordered for my fronts, but i could see em working for the rear too. Any 2006 r6 flush mounts should fit the stock hole without modding it

 
 
Where and how did you mount your resistors. I just got my package in the mail and will be installing today. I'm also hearing mixed things about having to modify the place where the signal mounts. True or false. Thank you I appreciate the time.

[sorkyah]

You could try flush mounts if you want them as low pro as possible 
http://www.motodynamic.com/flush-mount-led-front-turn-signals-2006-2007-yamaha-yzf-r6.html
 
 
These are what i ordered for my fronts, but i could see em working for the rear too. Any 2006 r6 flush mounts should fit the stock hole without modding it

Where and how did you mount your resistors. I just got my package in the mail and will be installing today. I'm also hearing mixed things about having to modify the place where the signal mounts. True or false. Thank you I appreciate the time.

i removed the backing plate for the turn signals and used double stick tape for mounting them... no issues yet
As for resistors... i didnt use them...
 
I have the CustomLED LED flasher relay.
 
http://www.customled.com/products/elfr-1-electronic-led-flasher-relay

[realtalkdiddy]

I just added these on my fz07, along with a Cyclops headlight. They are 3 wire and allow for DRL:
 
 
Firefly LEDs
 

[craigieboy]

Rizoma Graffio's Super bright !! plug and play no cutting wires.
 

 

 

[xcarbonsteelx]

Those look great! Do the front signals act as running lights as well?

[craigieboy]

Not sure, What does that mean ? need to be on all the time ??

[mjh937]

Those look great! Do the front signals act as running lights as well?

From what I have read the non-North American models do not have running lights, so they do not have the three wires on the front signals. I do not know if they still use the three wire connectors. Mine has three wire connectors front and rear, but just with two wires going to the rear ones. 

[CuppaJoe]

The Fz-07 has daytime running light upfront. If you want to keep that capability AND have LED , you need signals with three wires (or have to do a lot more gyrations with install). I found THESE three-wires one on Ebay. They are not fancy designs, but they work. 
I am a crazy Physics Prof. Beware

Hi, those turn signals look great! Do you happen to have a picture of them on the bike that you can share?