SOLD!!! Tarmac Faction FZ-07 Racing Prototype is FOR SALE!!!

[pgeldz 1,376]

SOLD!!!

 

The Tarmac Faction Yamaha FZ-07 Racing Prototype is for sale!

.

A unique opportunity to race another class awaits, and there isn’t room in the workshop (or our budget) to do both concurrently at the level we want. With our third streetbike project kicking off this winter and keeping us busy until the next road racing season starts, now is a good time to say goodbye to the FZ-07 RP.

.

The bike is in MINT condition, clean title, with only a half dozen race weekends on it, never finishing off the podium in a Twins race except once - on its first outing during its shakedown on a track I’ve never been to, with a 5th place finish at Fontana.

.

.

Cliff’s Notes on the bike itself:

.

- Fully Legal, Certified and Tech’d for MotoAmerica w/ Frame sticker (safety wired, etc)

- Motor Build by Gary Dean of Speed Demon Motorcycles (average 92hp on 4 different dynos)

- Bored Throttle Bodies by TWF Racing

- Web Cams

- Liqui Moly 5W-40 Street/Race motor oil (same as used in Moto2 and Moto2)

- Samco Custom Radiator Hose set w/clamps

- Carbonsmith Custom Velocity Stacks (Short Version) w/ custom MWR race filters

- Tarmac Faction Custom MotoAmerica legal Ram Airbox

- Tarmac Faction Full Custom Titanium Exhaust by Competition Werkes

- Suter Slipper Clutch

- Factory Pro Shift Arm w/ceramic bearing

- Full electronics suite by Rapid Bike (RapidBike Racing, My Tuning Bike, Shift Assist, and You Tune with Traction control, Launch control, Adjustable Engine Braking and real-time AFR adjustment and monitoring via onboard display/control unit)

- Current tune by Eric Dorn of EDR Performance

- K-Tech Fully Adjustable Fork Cartridges and Razor RR Rear Shock set up by Lenny Albin

- Robem Engineering Adjustable Offset Triples, Rear Suspension Link, Rearset Risers, Chain Guide, Shark Fin with misc. Titanium hardware throughout.

- Ohlins Steering Damper on custom mount

- Gilles Tooling Rearsets w/ Carbon Heal Guards, GP-LIGHT clip-ons, Chain adjusters w/built in spools, Sprocket Cover, Titanium Axle Nut

- EBC VEE Rotors all around, EPFA brake pads up front, HH out back, BF307+ brake fluid

- Proti Forged Titanium Rotor Bolts, Sprocket nuts, and misc hardware throughout.

- Spiegler custom Stainless Steel Braided Brake Lines

- Galespeed 17-17 VRC adjustable Master Cylinder and Clutch Perch with Reservoirs

- Dymag UP7X Forged Aluminum wheels with Ceramic Bearings

- R&G Racing Case covers, Radiator guard, Frame Sliders

- Carbonsmith Lever guards

- Domino XM2 quick throttle, A450 Road Race Grips

- Apex Racing Development Custom Switchgear

- Woodcraft keyswitch elimination harness

- AIM Sports Solo 2 Lap timer

- Custom bodywork: Altus Motorsports Tail and Tank Cover, and Tarmac Faction Upper w/ windscreen and Lower with side panels and custom fairing stay

- TechSpec Xline Tank Grips, road race seat

- Yamaha UK Radiator side guards

.

.

I may have forgot some items, but that’s the majority of it.

.

.

Bike will come with the following EXTRA items:

.

- Pit Bull Front and Rear Stands

- Spare set of Bodywork – Upper w/Windscreen, Lower, Tail, and Tank Cover

- Spare upper with short windscreen

- Spare Tarmac Faction Full Custom Titanium Exhaust by Competition Werkes – Black Ceramic Coated

- Second set of Dymag wheels ready to bolt on w/Ceramic Bearings, EBC Rotors and Proti Forged Titanium Rotor bolts/sprocket nuts, NEW

- Two (2) sets of Capit MAXIMA VISION PRO (Variable temp) Tire Warmers

- Capit Wind Stop Covers

- Capit Bike Cover

- Three (3) sets of Dunlop MotoAmerica Slick Tires with one session each on them

- A number of Talon aluminum rear sprockets, 44T, 45T, and 46T, NEW

- Second set of Gilles Rearsets , NEW

- Spare MWR Race Filters

- Carbonsmith custom Velocity stacks, Long Version, NEW

- Spare Tarmac Faction Tarmac Faction Custom MotoAmerica legal Ram Airbox, NEW

- Spare Gilles footpegs, NEW

- Spare Gilles clip-on bars x 4, NEW

- Spare Domino XM2 Quick Turn Throttle, NEW

- Spare Domino XM2 Grips, NEW

- Robem Engineering Underslung rear brake caliper mount w/ Brembo rear caliper, NEW (didn't have time to install it before my first Pro race at Laguna)

.

.

$16,750 or best offer.

[DewMan 1,922]

OK, Paul. Tell us the truth. You just like spending the $$$ on new kit/toys don't you?

I've lost track of how many race bikes you've built in the 4 yrs I've been here. LOL

Good luck with a quick sale. You always build quality race rigs .

[pgeldz 1,376]

On 10/14/2021 at 9:40 PM, DewMan said:

OK, Paul. Tell us the truth. You just like spending the $$$ on new kit/toys don't you?

I've lost track of how many race bikes you've built in the 4 yrs I've been here. LOL

Good luck with a quick sale. You always build quality race rigs .

Something like that!  LoL

[Evill_Ed 752]

I dunno.

Rossi is retiring.

There’s an open seat.

Paul is secretive and selling his sweet FZ.

You guys figure it out. I’ve drawn my own conclusions

Paul, good luck with whatever you have going on.

Ed 

[pgeldz 1,376]

On 10/18/2021 at 5:18 PM, Evill_Ed said:

I dunno.

Rossi is retiring.

There’s an open seat.

Paul is secretive and selling his sweet FZ.

You guys figure it out. I’ve drawn my own conclusions

Paul, good luck with whatever you have going on.

Ed 

LoL!

[pgeldz 1,376]

SOLD!!!

[AP996 183]

So what’s next, or are still not ready to say?

[pgeldz 1,376]

1 hour ago, AP996 said:

So what’s next, or are still not ready to say?

Can't really say...it's between two options...waiting to see which one pans out better

 

In the meantime, I have a new street bike project that'll keep me very busy this winter - that's sorta under wraps also, but I may start posting about it sooner than later (cause I can't contain my excitement, haha)

 

- Paul

[DewMan 1,922]

On 11/3/2021 at 6:54 PM, pgeldz said:

Can't really say...it's between two options...waiting to see which one pans out better

 

In the meantime, I have a new street bike project that'll keep me very busy this winter - that's sorta under wraps also, but I may start posting about it sooner than later (cause I can't contain my excitement, haha)

 

- Paul

Paul's such a tease. 

[pgeldz 1,376]

On 11/5/2021 at 8:33 AM, DewMan said:

Paul's such a tease. ">

Haha :)