Premium Member Popular Post cornerslider Posted May 14, 2021 Premium Member Popular Post Share Posted May 14, 2021 So now that my 07 is my dedicated track-only bike, I thought I should add an oil-containment belly pan for 2021. I found a manufacture called "Airtech" that builds generic body parts. I pulled some measurements, and ordered one. They make one called the "OCP1" that fit nearly perfect. They make an OCP1L (long), and a OCP1S (short) as well. I went with the standard length, and I only had to trim about 3/8" to make room for the exhaust. I made my own brackets out of aluminum flat stock from my local hardware store. It comes standard in white. As per Airtech, they suggested I use a spray-on bed liner for paint. Seems like a pretty good option so far? I never wanted a belly pan, and prefer the naked-bike look.... What do you guys think? 10 ""W.O.T. until you see god, then brake" Link to comment Share on other sites More sharing options...
Premium Member Evill_Ed Posted May 14, 2021 Premium Member Share Posted May 14, 2021 ,Looks good to me, nice fit. Fits the naked look well 1 "Do not let this bad example influence you, follow only what is good" Link to comment Share on other sites More sharing options...
Triple Jim Posted May 14, 2021 Share Posted May 14, 2021 It looks racy. Airtech has been around a long time. Link to comment Share on other sites More sharing options...
Global Moderator Pursuvant Posted May 14, 2021 Global Moderator Share Posted May 14, 2021 (edited) Ya, it's got a surprising (to meet) good look, I don't care for skids, it's just sometimes necessary. If that's the standard length, damn how long is the OCP1L? I would like to have that if I could beef it up on sides to add more crash protect to the sliders stuff I got everywhere and Yoshimura road kit protects. That is nicely done, me likes Edited May 14, 2021 by Pursuvant Correct myself, it's not a skid pan, but I would like it to hide some more added protects underneath it? Link to comment Share on other sites More sharing options...
D.A. Posted May 14, 2021 Share Posted May 14, 2021 Beautiful! 1 Link to comment Share on other sites More sharing options...
Premium Member cornerslider Posted May 14, 2021 Author Premium Member Share Posted May 14, 2021 3 hours ago, Pursuvant said: Ya, it's got a surprising (to meet) good look, I don't care for skids, it's just sometimes necessary. If that's the standard length, damn how long is the OCP1L? I would like to have that if I could beef it up on sides to add more crash protect to the sliders stuff I got everywhere and Yoshimura road kit protects. That is nicely done, me likes The OCP1L is 2" longer, and the OCP1S is 2" shorter ""W.O.T. until you see god, then brake" Link to comment Share on other sites More sharing options...
Premium Member fzar Posted May 18, 2021 Premium Member Share Posted May 18, 2021 Any picture from the other side @cornerslider? Link to comment Share on other sites More sharing options...
Premium Member cornerslider Posted May 19, 2021 Author Premium Member Share Posted May 19, 2021 I'll try this weekend- (I've already got it loaded in the trailer for my first TD of the season on Saturday!!!) 2 ""W.O.T. until you see god, then brake" Link to comment Share on other sites More sharing options...
Premium Member cornerslider Posted August 28, 2021 Author Premium Member Share Posted August 28, 2021 If anyone is interested in this belly-pan, make me an offer. I only used one day @ Road America. I acquired a new track bike, and put my 07 back on the street (belly pan interferes with the kickstand). I made the brackets (included), and it will bolt up to your 07. It may require some trimming depending on your exhaust? I have the Akrapovic Ti, and had to trim a little off. I paid $195 with shipping. Make me a reasonable offer, and it's yours- ""W.O.T. until you see god, then brake" Link to comment Share on other sites More sharing options...
Premium Member fzar Posted January 12, 2022 Premium Member Share Posted January 12, 2022 On 8/28/2021 at 7:28 AM, cornerslider said: (belly pan interferes with the kickstand). What did you do for the side stand elimination originally @cornerslider did you buy the woodcraft one? Link to comment Share on other sites More sharing options...
PMT-07 Posted January 12, 2022 Share Posted January 12, 2022 I love that thing. I’m in the market for one. Just need it to work with a kickstand. Glws Link to comment Share on other sites More sharing options...
Premium Member cornerslider Posted January 12, 2022 Author Premium Member Share Posted January 12, 2022 15 hours ago, fzar said: What did you do for the side stand elimination originally @cornerslider did you buy the woodcraft one? You can cut the two wires short, twist them together,and secure with a small wire nut. It does essentially the same as the Norton kickstand bypass, just not as “pretty”- 1 ""W.O.T. until you see god, then brake" Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now