Spatt Posted January 12, 2020 Share Posted January 12, 2020 (edited) Getting busy with MotoAmerica builds but still have time and capacity to fit orders in before the start of the season. We are a dealer for: JE Wiseco CP/Carrillo Cometic Web Racing Camshafts Yoyodyne Millennium Technologies From a simple build with drop in cams and an undercut trans to a full MotoAmerica build. Even make it simple for customer with helping to arrange shipping for entire bikes being sent to us, built and returned tuned ready for the track. Edited January 12, 2020 by Spatt Edited photo 5 Get your MT07 & FZ07 racing parts at https://www.robemengineering.com/fz-07-products Link to comment Share on other sites More sharing options...
1tondriver Posted January 12, 2020 Share Posted January 12, 2020 Ported head, Web Cams and Throttle bodies bored are all that’s left for me to want to do. Must resist short drive to Ohio... Link to comment Share on other sites More sharing options...
Spatt Posted January 12, 2020 Author Share Posted January 12, 2020 11 minutes ago, 1tondriver said: Ported head, Web Cams and Throttle bodies bored out are all that’s left fro me to want to do. Must resist short drive to Ohio... Millennium digitized our ports... and I have a spare head sitting on the shelf. Zoran does our throttle bodies and his turn around is awesome. 1 Get your MT07 & FZ07 racing parts at https://www.robemengineering.com/fz-07-products Link to comment Share on other sites More sharing options...
1tondriver Posted January 12, 2020 Share Posted January 12, 2020 1 hour ago, Spatt said: Millennium digitized our ports... and I have a spare head sitting on the shelf. "> Zoran does our throttle bodies and his turn around is awesome. I knew my basement started leaking for a reason. Lol Thanks Link to comment Share on other sites More sharing options...
ArturoM07 Posted October 5, 2020 Share Posted October 5, 2020 What camshaft coming fot Mt-07? Link to comment Share on other sites More sharing options...
Spatt Posted October 13, 2020 Author Share Posted October 13, 2020 On 10/5/2020 at 11:42 AM, ArturoM07 said: What camshaft coming fot Mt-07? Not sure I understand your question. Get your MT07 & FZ07 racing parts at https://www.robemengineering.com/fz-07-products Link to comment Share on other sites More sharing options...
ArturoM07 Posted October 13, 2020 Share Posted October 13, 2020 4 hours ago, Spatt said: Not sure I understand your question. I am looking for aftermarket camshaft for Mt-07. Which is the best for Mt-07? Link to comment Share on other sites More sharing options...
Spatt Posted October 14, 2020 Author Share Posted October 14, 2020 19 hours ago, ArturoM07 said: I am looking for aftermarket camshaft for Mt-07. Which is the best for Mt-07? Totally depends on the application. The cams we run in the bigger builds need custom pistons to clear. Web makes some drop in cams that work great and allow you to use the stock springs. totally depends on how far your going into the motor, where the motor will be use, and budget. 1 Get your MT07 & FZ07 racing parts at https://www.robemengineering.com/fz-07-products Link to comment Share on other sites More sharing options...
ArturoM07 Posted October 14, 2020 Share Posted October 14, 2020 36 minutes ago, Spatt said: Totally depends on the application. The cams we run in the bigger builds need custom pistons to clear. Web makes some drop in cams that work great and allow you to use the stock springs. totally depends on how far your going into the motor, where the motor will be use, and budget. My Goal currently and achieve 85whp or close to those numbers. Here in Orlando there are several competition vs Mt-07 and there is no Mt-07 running only mine vs Ktm Husqvarma and Honda. And I would like some good camshafts to combine with a good port and polish work Link to comment Share on other sites More sharing options...
Spatt Posted October 14, 2020 Author Share Posted October 14, 2020 7 hours ago, ArturoM07 said: My Goal currently and achieve 85whp or close to those numbers. Here in Orlando there are several competition vs Mt-07 and there is no Mt-07 running only mine vs Ktm Husqvarma and Honda. And I would like some good camshafts to combine with a good port and polish work Drop in cams will get you there. Stock motor with timed cams and MR12 will be close Id suspect also. Get your MT07 & FZ07 racing parts at https://www.robemengineering.com/fz-07-products Link to comment Share on other sites More sharing options...
ArturoM07 Posted October 14, 2020 Share Posted October 14, 2020 2 hours ago, Spatt said: Drop in cams will get you there. Stock motor with timed cams and MR12 will be close Id suspect also. Where i can find Drop in cams?? Link to comment Share on other sites More sharing options...
Spatt Posted October 14, 2020 Author Share Posted October 14, 2020 2 minutes ago, ArturoM07 said: Where i can find Drop in cams?? Send us an email and order them. They aren’t likely stock anywhere. Lead times are around 4-6 weeks at the moment and you need cores. Get your MT07 & FZ07 racing parts at https://www.robemengineering.com/fz-07-products Link to comment Share on other sites More sharing options...
ArturoM07 Posted October 14, 2020 Share Posted October 14, 2020 14 minutes ago, Spatt said: Send us an email and order them. They aren’t likely stock anywhere. Lead times are around 4-6 weeks at the moment and you need cores. give me the email please Link to comment Share on other sites More sharing options...
Spatt Posted October 15, 2020 Author Share Posted October 15, 2020 3 hours ago, ArturoM07 said: give me the email please It’s a well guarded secret. matt@robemengineering.com Get your MT07 & FZ07 racing parts at https://www.robemengineering.com/fz-07-products Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now