West Posted April 19, 2019 Share Posted April 19, 2019 I have a Puig touring style windshield and a small clip on extension for it. It works well. 2 times when going 80 to 90, I have had the headlight and windshield( since its attached) come out if the little bracket that holds it on. So then it's flapping in the wind, with no place to pull over, and who would after passing that huge Rv pulling the jeep? Any ideas on how to attach it more securely? Link to comment Share on other sites More sharing options...
Cinimod Posted April 20, 2019 Share Posted April 20, 2019 Are the screws/bolts coming loose? If that's the case, a drop of loctite threadlocker on each should solve the problem. Link to comment Share on other sites More sharing options...
West Posted April 20, 2019 Author Share Posted April 20, 2019 No, but good thought. It appears that the flashing headlight kit I have is holding the headlight out a bit and so the rubber tube that it sits in slips off when I have wind or higher speeds. 2 Zip ties that do not show has solved the issue! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.