Jump to content
Sign in to follow this  
pma

Hordpower

Recommended Posts

pma

Just pulled the trigger on the Hordpower airbox. Now to pull the ECU and send it back to 2WDW for a re-flash. Feels like Christmas in August!

Edited by pma
grammar
  • Like 4

Share this post


Link to post
Share on other sites
pma

I forgot to ask if anyone out there is running the Hord with the 2WDW flash.

Share this post


Link to post
Share on other sites
blackout
32 minutes ago, pma said:

I forgot to ask if anyone out there is running the Hord with the 2WDW flash.

My buddy is.  He loves it.  I have Hord's pcv tune.

  • Like 1

Share this post


Link to post
Share on other sites
norcal616

Hords PCV maps are built off of OEM tuned ECU... I did try to run Hordpower map on a 2WDW flashed ECU for my exhaust w/PCV auto tuner but made it run worse/odd... lesson learned was that PCV is not smart enough to know what "deceleration injection" was/how it works...  

 

you can run a 2wdw or other tuners flashed ECU as long as the "deccel injection" stays off and stock ign/fuel is left alone...

 

Hordpower pcv maps or his mail in ecu flashing are top notch, hes got his own dyno and has spent a good number of years racing... 

 

its kinda odd to me some users still buy his airbox but only want 2wdw to flash they ECU- they still dont have the same hp/tq as Hords maps 🙈

Share this post


Link to post
Share on other sites
Cruizin
39 minutes ago, norcal616 said:

Hords PCV maps are built off of OEM tuned ECU... I did try to run Hordpower map on a 2WDW flashed ECU but made it run worse/odd... lesson learned was that PCV is not smart enough to know what "deceleration injection" was/how it works...  

 

you can run a 2wdw or other tuners flashed ECU as long as the "deccel injection" stays off and stock ign/fuel is left alone...

 

Hordpower pcv maps or his mail in ecu flashing are top notch, hes got his own dyno and has spent a good number of years racing... 

 

its kinda odd to me some users still buy his airbox but only want 2wdw to flash they ECU- they still dont have the same hp/tq as Hords maps 🙈

Probably because 2WDW is very involved with this forum and Hord is not so much anymore.  Nels tunes race bikes at tracks all over the NW every weekend with his mobile dyno and I know for a fact that he would like to work with Hord to create the best of both worlds.  Race teams up this part of the country are pretty fond of Nels.  Hord is great too. Wish we could get them working together.   

  • Like 2

Share this post


Link to post
Share on other sites
blackout

"Send it Back" and "Re-Flash".  This means he already paid the money for the 2wdw flash and can get it updated for free.  That is why my buddy chose 2wdw, because he already had it flashed before the Hord box.

  • Like 1

Share this post


Link to post
Share on other sites
pma
2 hours ago, blackout said:

"Send it Back" and "Re-Flash".  This means he already paid the money for the 2wdw flash and can get it updated for free.  That is why my buddy chose 2wdw, because he already had it flashed before the Hord box.

Blackout wins the internet. 

  • Haha 2

Share this post


Link to post
Share on other sites
pma

Ok, got the airbox yesterday. Appears well made and should look killer once installed. Sent the ecu out today, so I have plenty of time to tear down the bike and document the process.

Share this post


Link to post
Share on other sites
chademinent

 

On 8/3/2018 at 8:16 PM, Cruizin said:

Probably because 2WDW is very involved with this forum and Hord is not so much anymore.  Nels tunes race bikes at tracks all over the NW every weekend with his mobile dyno and I know for a fact that he would like to work with Hord to create the best of both worlds.  Race teams up this part of the country are pretty fond of Nels.  Hord is great too. Wish we could get them working together.   

Nels Dynoed my bike with the airbox last spring.  Said it was the strongest running 07 he's put on the dyno (started out with the most hp he's seen).  Either way you  go you will get a nice increase in power, especially at the top end.

 

Heres a link to the video:

FX07 Dyno Run

Edited by chademinent
  • Like 4

Share this post


Link to post
Share on other sites
pma

Sneak peek. Just waiting for the ecu and a couple of little things I decided to add while I have it apart. Next project for her is suspension.

IMG_1571.jpg

Share this post


Link to post
Share on other sites
r1limited
On 8/14/2018 at 12:34 PM, chademinent said:

Said it was the strongest running 07 he's put on the dyno (started out with the most hp he's seen)

He said that to me as well with 73hp without the hord.  What was yours final output

Share this post


Link to post
Share on other sites
fzar
4 hours ago, r1limited said:

He said that to me as well with 73hp without the hord.  What was yours final output

After the Yoshi install or before?

Share this post


Link to post
Share on other sites
djfz07
18 minutes ago, fzar said:

After the Yoshi install or before?

I'd be interested in knowing both!

 

I have the Hordpower airbox, Akra Ti, and 2WDW flash with Active Tune.  Feels really strong now but I will get it on a dyno soon

  • Like 1

Share this post


Link to post
Share on other sites
r1limited
1 hour ago, fzar said:

After the Yoshi install or before?

Both

As I have the Yosh, and the flash.  Plus misc tweaks I have yet to reveal.  Mine 2016 put 73 out, which is cool, but it took away that punch at bottom, but the damn thing pulls like a freight train through all gears which is awesome in corners as the torque is plesent in mid range and not bruttal

  • Like 1

Share this post


Link to post
Share on other sites
norcal616

yoshi+hord+tune= 80whp 

 

yoshi+tune= approx 70hp

 

 

with Hordpower the bike pulls like a freight train till you let off the throttle, its very predictable linear power vs odd bumps/dips in power 

  • Like 3

Share this post


Link to post
Share on other sites
fzar
12 hours ago, norcal616 said:

yoshi+hord+tune= 80whp 

 

yoshi+tune= approx 70hp

 

 

with Hordpower the bike pulls like a freight train till you let off the throttle, its very predictable linear power vs odd bumps/dips in power 

I assume from your earlier post that you have the Hord flash to get the 80 Whp? Another question, the yoshi + tune 70 hp! is that a hord flash or 2wdw?

 

Share this post


Link to post
Share on other sites
sansnombre
On 8/14/2018 at 12:34 PM, chademinent said:

 

Nels Dynoed my bike with the airbox last spring.  Said it was the strongest running 07 he's put on the dyno (started out with the most hp he's seen).  Either way you  go you will get a nice increase in power, especially at the top end.

 

Heres a link to the video:

FX07 Dyno Run

Your headlight system on the dyno run video - what is that, where did you get it? And do you like it?

Edited by sansnombre
  • Like 1

Share this post


Link to post
Share on other sites
norcal616
4 minutes ago, fzar said:

I assume from your earlier post that you have the Hord flash to get the 80 Whp? Another question, the yoshi + tune 70 hp! is that a hord flash or 2wdw?

 

by "Hord" i ment to say Hordpower Airbox .. so it should have been

Hordpower Airbox+yoshi+tune= 80whp

 

Hordpower has his maps available for ECU flash or PCV( has about 6 diffrent exhaust tunes IIRC) ... 2wdw has plenty of tunes, many ppl use em them for tuning, even has a few Hordpower Airbox maps...

 

for reference pretty much the vast majority( yoshi,akra, etc)of aftermarket exhaust+tune will be within 2hp+/- 

 

Personally I went with Hords PCV map because its his product he created and has spent hours playing around with diffrent settings

Share this post


Link to post
Share on other sites
norcal616
On 8/14/2018 at 3:34 PM, chademinent said:

 

Nels Dynoed my bike with the airbox last spring.  Said it was the strongest running 07 he's put on the dyno (started out with the most hp he's seen).  Either way you  go you will get a nice increase in power, especially at the top end.

 

Heres a link to the video:

FX07 Dyno Run

I like how he was expressing his excitement claping on his thighs...

  • Like 1

Share this post


Link to post
Share on other sites
norcal616

for $ comparison

 

Hordpower Airbox+yoshi+tune= approx $1200 for 80whp

 

yoshi+tune= approx $900 for 70whp

 

AkraTi+tune= approx $1200 for 75whp

 

what the dyno charts dont show is how much easier the little FZ-07 breathes, tractor pulling torque feeling all the way to redline,  where the stock airbox makes the power feel "flat/running outta steam/breath" from mid range and up... 

 

 

Share this post


Link to post
Share on other sites
chademinent
13 minutes ago, sansnombre said:

Your headlight system on the dyno run video - what is that, where did you get it? And do you like it?

Its home-made.  I'm using Two Westin 4.75" LED offroad lights (one spot one flood beam).  So yeah, I like them.  They are bright AF and people can see me coming from a long ways off during the daytime.

Share this post


Link to post
Share on other sites
fzar
13 minutes ago, norcal616 said:

by "Hord" i ment to say Hordpower Airbox .. so it should have been

Hordpower Airbox+yoshi+tune= 80whp

Yeah I got that part, but thanks for clearing it up for anyone else reading

 

14 minutes ago, norcal616 said:

Hordpower has his maps available for ECU flash or PCV( has about 6 diffrent exhaust tunes IIRC) ... 2wdw has plenty of tunes, many ppl use em them for tuning, even has a few Hordpower Airbox maps...

 

for reference pretty much the vast majority( yoshi,akra, etc)of aftermarket exhaust+tune will be within 2hp+/- 

 

Personally I went with Hords PCV map because its his product he created and has spent hours playing around with diffrent settings

I hear ya on using Hords PCV, or for other people using his flash as he is the 1 who has designed the airbox. I personally have the 2wdw flash on stock pipe, Happy customer, and if I was to get the hord airbox I'd have to consider my options as the cost becomes outragous to get another flash from a different source. I have to remember it's not what its going to cost now or in the future, it's how much am I into this already!!

Share this post


Link to post
Share on other sites
pma

It’s all together now. Triple checked tightness all the way around. Added a couple shiny bits to it because why not? She fired right up and sounds great. Tomorrow morning, we ride 😎.

D858094B-43E4-4939-BBC0-19CD61C88109.jpeg

  • Like 2

Share this post


Link to post
Share on other sites
metsen duts

What exhaust is that thinking about modding my 07 and I like the looks of that pipe

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


×

Important Information

By using this site, you agree to our Terms of Use.