Jump to content
The MT-07 Forum

Getting M4 exhaust (slip on)


jayowenz

Recommended Posts

What's up everyone!
I'm getting my M4 on Monday and I wanted to know if I need to Replace the Head gaskets with new ones. 
If Yes, should I buy grease or something to put on the gaskets so they stick to the engine?
Thanks! 
PS: Here's my baby <3
3250.jpg
 

Link to comment
Share on other sites

  • Global Moderator

I would replace them, especially as they are not expensive. You will most likely get away with using the old ones with no problems, but why not do it right and not have to worry about a possible exhaust leak. The service manual says to use a lithium soap based grease (it also says to use new gaskets).

Link to comment
Share on other sites

How many miles do you have? I put mine on around 600 miles and reused the gaskets and haven't had any leaks.
I have 9200 miles
Link to comment
Share on other sites

Is it normal that the bike is less hot compared to when I had the stock exhaust?
I always have around 80-90 degrees with the m4! I love it
With the stock, I went up to 105
 

Link to comment
Share on other sites

ducttapewd40
How many miles do you have? I put mine on around 600 miles and reused the gaskets and haven't had any leaks.
I have 9200 miles
 
 
I'd probably get some new ones just to be safe and it's not like they're expensive.
Link to comment
Share on other sites

I have 9200 miles
I'd probably get some new ones just to be safe and it's not like they're expensive.
 

Yeah, I installed new gaskets! Thanks for the info guys!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.