rhino Posted July 23, 2017 Share Posted July 23, 2017 Replacing the rear brake switch, as replacing the Rearset. Want to make the new switch plug n play, and not splice into existing switch wiring. Anyone know know where to buy the below connector (2-pin female)? Link to comment Share on other sites More sharing options...
timjh Posted July 23, 2017 Share Posted July 23, 2017 You can probably reuse the connector by carefully removing the wires/pins. All you need is the appropriate pins from multiple sources. It looks from here like you need female pins for your male plastic connector. Link to comment Share on other sites More sharing options...
rick Posted July 23, 2017 Share Posted July 23, 2017 ordinarily, i'd look here 1st. http://www.cycleterminal.com but they're closed until Aug 18. Can't even see any picts right now. They are where I bought a plug to fit the aux. circuit have a look here to see if something looks like it matches. http://www.easternbeaver.com/Main/Elec__Products/Connectors/connectors.html Link to comment Share on other sites More sharing options...
rhino Posted July 29, 2017 Author Share Posted July 29, 2017 Looks like a replacement OEM switch is about $20. At that price, decided to just use the existing OEM connector. In the future, can buy a new switch c/w the wiring connector if I decide to go back. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.