pH Posted June 23, 2015 Share Posted June 23, 2015 Over the past weekend I purchased the Trackside rear paddock stand/swing arm stand from CycleGear and I wanted to share some feedback and pictures. CycleGear claims that the stand retails for $99.00 but you will typically find it on sale for $49.00 but it just so happened that they were running an additional sale so I got it for $39.00. The main reason was to easily and safely tighten my chain slack so although I like the R&G axle sliders they would not have done me any good because I need access to the axle nut. The stand comes in 3 main pieces and you have to assemble it. took about 5 minutes and was very solid and the finish was very nice. I was actually impressed with the overall quality and value. The fir was like a glove, lucked out on that. If it was any narrower I would have had to return it, it's almost like it was made specifically for the FZ-07. It also includes the support brackets for spools. It raises and lowers easily not sketchy and no sudden snaps or jerks. It's no Pitbull but it's certainly no Chihuahua! I like to think of it as a big, friendly, loyal Labrador! Enjoy!!! pH Link to comment Share on other sites More sharing options...
magsz18 Posted June 23, 2015 Share Posted June 23, 2015 Does the stand work with spools? I believe i read somewhere that it was too narrow to work with axle spools? Link to comment Share on other sites More sharing options...
pH Posted June 24, 2015 Author Share Posted June 24, 2015 Hi magsz18, no unfortunately it is to narrow for spools. If you take a look at pic[HASH]2 you will see that the support brackets are maxed out to their widest setting. Link to comment Share on other sites More sharing options...
cavedog Posted June 24, 2015 Share Posted June 24, 2015 Just to verify is this the one? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.