Jump to content
The MT-07 Forum

SW Motech center stand


cavedog

Recommended Posts

This center stand is not actually discontinued as it says.  Direct quote from Twisted Throttle:
 

Mike here from Twisted Throttle. I'm writing you regarding an inquiry you've recently placed with SW-Motech about their FZ-07 centerstand. We are the North American distributor for SW-Motech, and they have forwarded your inquiry to us. The centerstand for the FZ-07 has not been discontinued. It has merely undergone a design revision. We do not currently have them in stock, but our next shipment is scheduled to arrive in approximately 3-4 weeks. If you would like to place an order for one, please give us a call at 855-255-5550, as these are not available online. If you have any other questions in the meantime, please don't hesitate to contact me.
However he does state that they are not available online, so for anyone who has been looking for this stand you can use the number above.
 
Also- does anyone here have this stand, and an aftermarket exhaust?  Mike confirmed that they only guarantee fitment with OEM exhaust.
Link to comment
Share on other sites

  • Premium Member
n2shotokai

This item was added to Revzilla weeks ago but is Unavailable. I have debated this purchase.

Link to comment
Share on other sites

  • Premium Member

I was looking into having one fabbed up since I have installed a mivv gp exhaust. It freed up the factory exhaust mounting locations so I've been having lots of ideas. Having some of the combat engineers work with some materials and designs. I'll post them up as I test them out.

Link to comment
Share on other sites

I was looking into having one fabbed up since I have installed a mivv gp exhaust. It freed up the factory exhaust mounting locations so I've been having lots of ideas. Having some of the combat engineers work with some materials and designs. I'll post them up as I test them out.
I was thinking of doing something similar.  I like the concept but I think their price is a little high.  It seems simple enough.
Link to comment
Share on other sites

I would design it to re-use the linkage ears. Might need a longer bolt but those are pretty easy to come by even if you have to resort to a specialist shop. I'm not impressed with those welds on the tabs but if it can handle shock forces, I reckon it can handle a measly stand.

bannerfans_1095431.jpg
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.