wojo72 Posted May 16, 2015 Share Posted May 16, 2015 Which way do I turn the tool to increase the stiffness of the shock? Do I rotate from top to bottom or bottom and move the tool upward? I can't find my farkin' manual. Thanks Link to comment Share on other sites More sharing options...
yamahaha Posted May 16, 2015 Share Posted May 16, 2015 I just finished adjusting mine up a couple more notches. On the right side of the bike (throttle side) push down on the tool (clockwise). This will tighten. Link to comment Share on other sites More sharing options...
cndnmax Posted May 16, 2015 Share Posted May 16, 2015 Looks at the bottom coller of the shock, You Will see notches. Usually you can only rotate one way. Righty tighty. Link to comment Share on other sites More sharing options...
jerryv Posted May 16, 2015 Share Posted May 16, 2015 Buenos Notches! Sorry, could not resist Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.