claustro Posted June 26, 2015 Share Posted June 26, 2015 Hi all, I was very tired regarding the position of the stock horn button so I decided to build a new one and put it in the "normal "position. I used a cheap button found on ebay , I made a small house of plastic and glued the button on it , then filled the small gaps with silicone. I used the bottom screw to fix the plate in position ,and then I soldered the 2 cables form my new button to the original contact. With this mod I have finally a button in the right place I can change it back to stock without problem any time. Regards. Andrea Link to comment Share on other sites More sharing options...
Kwaipuak Posted June 26, 2015 Share Posted June 26, 2015 So, the original button could be reassigned to something else, like @cndnmax 's garage door mod: http://fz07.org/thread/2550/free-cheap-garage-opener-solution I like it! Link to comment Share on other sites More sharing options...
claustro Posted June 26, 2015 Author Share Posted June 26, 2015 Yes this could be an option , I already mapped my garage opener on the high beam flash button before this mod :-) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.